OGP – Electromechanical System

RR Parkon

OGP – Electromechanical System

  • This is an Independent parking system
  • System can be designed for 2 Ton and 2.5 Ton payload capacities
  • Can be used for more than 2 levels up to 5 levels above the ground
  • The maximum span can be 8 grids and 6 levels
  • Except the TOP level all the levels will have one empty space
  • Main frame structure is of steel columns, cross members, connecting bracing
  • Safety bars provided at every parking slots except the TOP floor
  • Maximum entry space available since vertical columns are placed after 3 parking lots
  • The overall lifting is done by the Wire rope and Chain as per the configuration
  • The geared motor with break system is used to drive the sprockets and chain
  • The pallet gets lifted with the center of gravity with the wire ropes suspended to vertical heights
  • The cross transfers take place with the help of smaller motors
  • The Ground floor pallets only move LEFT and RIGHT
  • The TOP floors pallets only move UP and DOWN
  • Intermediate floors pallets can be moved LEFT/RIGHT and UP/DOWN
  • All the GROUND floor & TOP floor pallets have one single motor
  • The intermediate parking pallets/trolley has two motors each – one for lifting and one for transfer
  • These systems can be installed in open spaces as well as in the building
  • The cladding and roofing is compulsory to ensure protection from rain water and direct exposure to open conditions
  • The overall parking sizes can be planned that will be suitable for SEDAN, SUV, and COMBINATION as per the project requirement
  • This is a PLC operated system with HMI/Push Button type user interface
  • Both AUTO and MANUAL modes are available
  • Power supply till the control panel is compulsory with required protections,
  • Preferable to have the foundation bolts inserted at the time of foundation civil work
  • Front Entry sensor is available for the required safety during the operations of the systems
Download Datasheet