OGP – Electromechanical System
OGP – Electromechanical System
- This is an Independent parking system
- System can be designed for 2 Ton and 2.5 Ton payload capacities
- Can be used for more than 2 levels up to 5 levels above the ground
- The maximum span can be 8 grids and 6 levels
- Except the TOP level all the levels will have one empty space
- Main frame structure is of steel columns, cross members, connecting bracing
- Safety bars provided at every parking slots except the TOP floor
- Maximum entry space available since vertical columns are placed after 3 parking lots
- The overall lifting is done by the Wire rope and Chain as per the configuration
- The geared motor with break system is used to drive the sprockets and chain
- The pallet gets lifted with the center of gravity with the wire ropes suspended to vertical heights
- The cross transfers take place with the help of smaller motors
- The Ground floor pallets only move LEFT and RIGHT
- The TOP floors pallets only move UP and DOWN
- Intermediate floors pallets can be moved LEFT/RIGHT and UP/DOWN
- All the GROUND floor & TOP floor pallets have one single motor
- The intermediate parking pallets/trolley has two motors each – one for lifting and one for transfer
- These systems can be installed in open spaces as well as in the building
- The cladding and roofing is compulsory to ensure protection from rain water and direct exposure to open conditions
- The overall parking sizes can be planned that will be suitable for SEDAN, SUV, and COMBINATION as per the project requirement
- This is a PLC operated system with HMI/Push Button type user interface
- Both AUTO and MANUAL modes are available
- Power supply till the control panel is compulsory with required protections,
- Preferable to have the foundation bolts inserted at the time of foundation civil work
- Front Entry sensor is available for the required safety during the operations of the systems
Download Datasheet
